In this post, we are going to tell you about Redmi/mi Note 3 edl point/edl mode.Edl Point is known as Emergency Download Mode, it is used to unlock the bootloader of the phone. If your phone is locked You unlock your phone's bootloader, you cannot unlock it, in this process you will have to take your phone to Edl Mode.

If your phone is of Qualcomm processor, then your phone will definitely support EDL Mode or Emergency Download Mode,However, not all Qualcomm based devices support this.However, today, Mediteck Processor Phone is also being used to unlock bootloader.

The Redmi Note 3 is a very good smartphone of the Xiaomi brand, due to its camera quality and battery backup, it runs a lot, the Redmi Note 3 comes with a Qualcomm processor, due to which it has become stronger to take it to Edl Mode.

There can be many reasons behind switching to Redmi Note 3 edl Point, if you want to flash the stock ROM in your phone or to unlock your phone, then in this case you will need edl mode. Iff you want to install or update your own Redmi Note 3 phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode.

Redmi Note 3 Test Point - MI Note 3 Edl Point

Lets Seen Image And Follow This Step To Connect Redmi Note 3 In Edl Mode.
mi-note-3-edl-point

 How To Connect Redmi Note 3 In Edl Mode

1. First open back cover of Redmi Note 3 ( Be careful when removing the back cover of the device )

2. Remove To Bettery Cable ( Battery not required for EDL mode )

3. Now Use tweezers To Short 2 Red Dot Point, As shown in the image above.

4. Now plug the USB cable On Your Device .

5 . Your phone has now successfully gone into EDL mode, now you can see the Qualcomm HS USB QDLodar 9008 port in your computer.

Thanks For Visit My Article...






Post a Comment

Previous Post Next Post